15bbl commercial beer fermenter for microbrewery
These are 15bbl comercial beer fermentation tanks and bright tanks made by SENMO company.The beer tanks are double layers with insulation.The whole tanks are made of stainless steel 304 plate,inner tank thickness is 3mm,outer tank is 2mm.The insulation is polyurethane,thickness is 80mm. The manhole of the tanks can be on the side or on the top,
Side manhole+Beer outlet+Temperature tube+Glycol water pipe connector
Below is some advantages of the 15bbl conical beer fermenters.
With cone bottom and angle between 60 ° and 90 °, it is convenient to recycle yeast after (main) fermentation. In order to ensure the good filtration of beer, yeast mostly uses strains with good cohesiveness.
The tank body is equipped with a cooling jacket, and the cooling capacity can meet the process cooling requirements. The column part of the tank is equipped with 2~3 sections of cooling jacket, and the cone part is equipped with a section of cooling jacket. This structure is conducive to the settlement and preservation of yeast.
The conical tank is a closed tank, which can recover CO2 and also conduct CO2 washing; It can be used as fermentation tank and beer storage tank.
The natural convection of alcohol in the fermentation tank is relatively strong. The higher the tank, the stronger the convection. The convection intensity is related to the tank shape, capacity and control of the cooling system.
The conical bber fermenter is quite high, and the yeast with strong cohesion is easy to precipitate, while the yeast with poor cohesion needs to be separated by other means.
The conical bottom tank is not only applicable to the fermentation below, but also applicable to the fermentation above.
Temprature sensor blind tube+Pipe port inside of tank+Beer ports+Interior of the tank
In the past, there was no strict regulation on the size of conical tank, with the height of 40m and the diameter of more than 10m. With the continuous improvement of fermentation theory and brewing technology, in order to meet the requirements of beer quality, conical tanks must be carefully designed and manufactured according to certain specifications.Practice has proved that the maximum liquid level of wort in the conical fermentation tank is 5m; The wort level height of the conical wine storage tank can be determined according to the actual situation, because the diacetyl decomposition has been completed in the post ripening process, which has little impact on the fermentation. There are different views on the diameter height ratio of conical tank, generally 1:3~1:5 is appropriate.
If you want to learn more about the 15bbl conical beer fermentation tanks,please send us inquiry.Our salesa engineer will send you more technical instruction on it.Cheers!
