300L beer equipment for restaurant
This is our microbrewery 300l combined beer brewing equipment for restaurants.It is our new designed brewhouse system for the brewpub,restaurant and microbrewery.On the right side,the whole vessel include two tuns,on the top is the 300l mash tun,under the mash tun is the 300L hot water tank,we can use the hot water tank as 300L wort storage tank. On the left side,it is the 300L wort kettle,the 300l kettle also has whirlpool function.The whole 300l combined beer brewing equipment plates and accessories are made of international standard SUS304 stainless steel; Laser cutting and argon shielded welding, internal centralized pickling and passivation, accuracy ≤ 0.4 μ m；
Steam jacket around the 300L mash tun and 300L wort kettle: working pressure 0.15MPa, test pressure 0.4MPa, super large heating area, heating rate 1-1.2 ℃/min, automatic temperature control;
The 300L boiling kettle is equipped with forced circulation to support boiling under pressure, ensuring 8-12% boiling strength, improving the utilization rate of heat energy, and can optionally be equipped with condensate recovery device;The whirlpool circulates tangentially, and the high and low liquid level discharge ports are equipped with baffles for hot solidified substances and hops decomposition substances;
Variable frequency automatic plough cutter for 300L Mash/lauter tun, removable milling sieve plate, spacing 0.7mm, opening rate greater than 17%, multiple supporting points at the bottom, and backwashing device to reduce sanitary dead angle; The whole wort filter process is closed and has strong timeliness;
These are 300l beer fermenters made by SENMO Machinery.The tank plates and accessories of the 300l fermenters are made of international standard SUS304 stainless steel,however,if you want SUS316 stainless steel plates for the tanks,we can do the customized production for you.The beer tanks surface can be brushed polishing,mirror polishing or red copper,interior of the tanks also can be mirror polished if you want.The following fittings are matched with the fermenters:
-Mechanical pressure regulating valve
-Beer sample valve
-Breath valve
-Thermometer
-Hops dosing port
-Temperature sensor
-Beer rotary pipe
-Drain outlet
-CIP ball and CIP arm
-CO2 carbon stone
The connection of the fittings can be tri-clamp,diary couplers and other connection way you want.Meanwhile,if you need other fitings or port on the fermenters,you can tell us and we do the special design for you.
The cooling pipes+insulation pipes+wrapped tape+temperature sensor wire
A complete beer refrigeration system in the microbrewery including glycol water tank, cold water tank, chiller, pump and relevant pipelines. Below is detailed instruction on the cooling system:
Glycol water tank specification: 100L-30000L;The tank plates and accessories are made of international standard SUS304 stainless steel; Laser cutting and argon shielded welding, internal centralized pickling and passivation, accuracy ≤ 0.4 μ m； Polyurethane foam insulation;
Chiller specification: 1HP-50HP;
Cooling pipes material: PPR, stainless steel;
Cooling pipes thermal insulation materials: rubber plastic sponge, polyurethane, etc;
Exterior decoration of cooling pipes: colored binding tape, iron sheet, stainless steel, etc
The 300L combined beer brewing equipment cost is also very good,and there are some option devices,which makes the price of the 300L brewing equipment more flexible. If you want to build a microbrewery with such capacity,please contact with us,our sales engineer can send you a detailed quote for reference.Cheers!
